1,146 research outputs found

    Infrared spectral absorption coefficient data for water

    Get PDF
    Infrared spectral absorption coefficient data for water vapor over temperature range 575 to 1250 degrees K and pressures to 1 atmospher

    A research to reduce interior noise in general aviation airplanes. General aviation interior noise study

    Get PDF
    The construction, calibration, and properties of a facility for measuring sound transmission through aircraft type panels are described along with the theoretical and empirical methods used. Topics discussed include typical noise source, sound transmission path, and acoustic cabin properties and their effect on interior noise. Experimental results show an average sound transmission loss in the mass controlled frequency region comparable to theoretical predictions. The results also verify that transmission losses in the stiffness controlled region directly depend on the fundamental frequency of the panel. Experimental and theoretical results indicate that increases in this frequency, and consequently in transmission loss, can be achieved by applying pressure differentials across the specimen

    A research program to reduce interior noise in general aviation airplanes. Design of an acoustic panel test facility

    Get PDF
    The design, construction, and costs of a test facility for determining the sound transmission loss characteristics of various panels and panel treatments are described. The pressurization system and electronic equipment used in experimental testing are discussed as well as the reliability of the facility and the data gathered. Tests results are compared to pertinent acoustical theories for panel behavior and minor anomalies in the data are examined. A method for predicting panel behavior in the stiffness region is also presented

    Externally Dispersed Interferometry for Precision Radial Velocimetry

    Get PDF
    Externally Dispersed Interferometry (EDI) is the series combination of a fixed-delay field-widened Michelson interferometer with a dispersive spectrograph. This combination boosts the spectrograph performance for both Doppler velocimetry and high resolution spectroscopy. The interferometer creates a periodic spectral comb that multiplies against the input spectrum to create moire fringes, which are recorded in combination with the regular spectrum. The moire pattern shifts in phase in response to a Doppler shift. Moire patterns are broader than the underlying spectral features and more easily survive spectrograph blurring and common distortions. Thus, the EDI technique allows lower resolution spectrographs having relaxed optical tolerances (and therefore higher throughput) to return high precision velocity measurements, which otherwise would be imprecise for the spectrograph alone.Comment: 7 Pages, White paper submitted to the AAAC Exoplanet Task Forc

    Magnetic inflation and stellar mass. V. Intensification and saturation of M-dwarf absorption lines with Rossby number

    Get PDF
    In young Sun-like stars and field M-dwarf stars, chromospheric and coronal magnetic activity indicators such as Hα, X-ray, and radio emission are known to saturate with low Rossby number (Ro lesssim 0.1), defined as the ratio of rotation period to convective turnover time. The mechanism for the saturation is unclear. In this paper, we use photospheric Ti i and Ca i absorption lines in the Y band to investigate magnetic field strength in M dwarfs for Rossby numbers between 0.01 and 1.0. The equivalent widths of the lines are magnetically enhanced by photospheric spots, a global field, or a combination of the two. The equivalent widths behave qualitatively similar to the chromospheric and coronal indicators: we see increasing equivalent widths (increasing absorption) with decreasing Ro and saturation of the equivalent widths for Ro lesssim 0.1. The majority of M dwarfs in this study are fully convective. The results add to mounting evidence that the magnetic saturation mechanism occurs at or beneath the stellar photosphere.Published versio

    A physically motivated and empirically calibrated method to measure effective temperature, metallicity, and Ti abundance of M dwarfs

    Get PDF
    The ability to perform detailed chemical analysis of Sun-like F-, G-, and K-type stars is a powerful tool with many applications including studying the chemical evolution of the Galaxy and constraining planet formation theories. Unfortunately, complications in modeling cooler stellar atmospheres hinders similar analysis of M-dwarf stars. Empirically-calibrated methods to measure M dwarf metallicity from moderate-resolution spectra are currently limited to measuring overall metallicity and rely on astrophysical abundance correlations in stellar populations. We present a new, empirical calibration of synthetic M dwarf spectra that can be used to infer effective temperature, Fe abundance, and Ti abundance. We obtained high-resolution (R~25,000), Y-band (~1 micron) spectra of 29 M dwarfs with NIRSPEC on Keck II. Using the PHOENIX stellar atmosphere modeling code (version 15.5), we generated a grid of synthetic spectra covering a range of temperatures, metallicities, and alpha-enhancements. From our observed and synthetic spectra, we measured the equivalent widths of multiple Fe I and Ti I lines and a temperature-sensitive index based on the FeH bandhead. We used abundances measured from widely-separated solar-type companions to empirically calibrate transformations to the observed indices and equivalent widths that force agreement with the models. Our calibration achieves precisions in Teff, [Fe/H], and [Ti/Fe] of 60 K, 0.1 dex, and 0.05 dex, respectively and is calibrated for 3200 K < Teff < 4100 K, -0.7 < [Fe/H] < +0.3, and -0.05 < [Ti/Fe] < +0.3. This work is a step toward detailed chemical analysis of M dwarfs at a similar precision achieved for FGK stars.Comment: accepted for publication in ApJ, all synthetic spectra available at http://people.bu.edu/mveyette/phoenix

    High-resolution broadband spectroscopy using externally dispersed interferometry at the Hale telescope: part 2, photon noise theory

    Full text link
    High-resolution broadband spectroscopy at near-infrared (NIR) wavelengths (950 to 2450 nm) has been performed using externally dispersed interferometry (EDI) at the Hale telescope at Mt. Palomar, with the TEDI interferometer mounted within the central hole of the 200-in. primary mirror in series with the comounted TripleSpec NIR echelle spectrograph. These are the first multidelay EDI demonstrations on starlight. We demonstrated very high (10×) resolution boost and dramatic (20× or more) robustness to point spread function wavelength drifts in the native spectrograph. Data analysis, results, and instrument noise are described in a companion paper (part 1). This part 2 describes theoretical photon limited and readout noise limited behaviors, using simulated spectra and instrument model with noise added at the detector. We show that a single interferometer delay can be used to reduce the high frequency noise at the original resolution (1× boost case), and that except for delays much smaller than the native response peak half width, the fringing and nonfringing noises act uncorrelated and add in quadrature. This is due to the frequency shifting of the noise due to the heterodyning effect. We find a sum rule for the noise variance for multiple delays. The multiple delay EDI using a Gaussian distribution of exposure times has noise-to-signal ratio for photon-limited noise similar to a classical spectrograph with reduced slitwidth and reduced flux, proportional to the square root of resolution boost achieved, but without the focal spot limitation and pixel spacing Nyquist limitations. At low boost (∼1×) EDI has ∼1.4× smaller noise than conventional, and at >10× boost, EDI has ∼1.4× larger noise than conventional. Readout noise is minimized by the use of three or four steps instead of 10 of TEDI. Net noise grows as step phases change from symmetrical arrangement with wavenumber across the band. For three (or four) steps, we calculate a multiplicative bandwidth of 1.8:1 (2.3:1), sufficient to handle the visible band (400 to 700 nm, 1.8:1) and most of TripleSpec (2.6:1)

    A Catalog of Cool Dwarf Targets for the Transiting Exoplanet Survey Satellite

    Get PDF
    We present a catalog of cool dwarf targets (V−J>2.7V-J>2.7, Teff≲4000KT_{\rm eff} \lesssim 4000 K) and their stellar properties for the upcoming Transiting Exoplanet Survey Satellite (TESS), for the purpose of determining which cool dwarfs should be observed using two-minute observations. TESS has the opportunity to search tens of thousands of nearby, cool, late K and M-type dwarfs for transiting exoplanets, an order of magnitude more than current or previous transiting exoplanet surveys, such as {\it Kepler}, K2 and ground-based programs. This necessitates a new approach to choosing cool dwarf targets. Cool dwarfs were chosen by collating parallax and proper motion catalogs from the literature and subjecting them to a variety of selection criteria. We calculate stellar parameters and TESS magnitudes using the best possible relations from the literature while maintaining uniformity of methods for the sake of reproducibility. We estimate the expected planet yield from TESS observations using statistical results from the Kepler Mission, and use these results to choose the best targets for two-minute observations, optimizing for small planets for which masses can conceivably be measured using follow up Doppler spectroscopy by current and future Doppler spectrometers. The catalog is incorporated into the TESS Input Catalog and TESS Candidate Target List until a more complete and accurate cool dwarf catalog identified by ESA's Gaia Mission can be incorporated.Comment: Accepted to The Astronomical Journal. For the full catalog, please contact the corresponding autho

    The Politics of Food and the Disintegration of the Anglo-Canadian Trade Relationship, 1947-1948

    Get PDF
    This paper examines a somewhat peripheral event in postwar transatlantic diplomacy, the 1947-48 food negotiations between Canada and the United Kingdom, because the process and the outcome of these talks illuminate the deterioration in the traditionally close relationship between the two countries. Because of the financial strains caused by British wartime expenditures, Canada was unable to negotiate a reestablishment of the prewar trade relationship, in which surpluses in her trade with Great Britain financed deficits in her accounts with the United States. The British negotiating strategy forced the Canadian government to reconsider its traditional dependence on the British connection, which had hitherto been so fundamental to Canadian history. This paper therefore challenges the view that Canadian politicians ''sold out'' the country in shifting attention from Britain to the United States after World War II.Si cette article se penche sur un événement périphérique, en quelque sorte, dans l'histoire de la diplomatie transatlantique de l'après-guerre, soit les négociations entre le Canada et la Grande-Bretagne au sujet du commerce des produits alimentaires, c'est que le processus de même que les résultats de ces rencontres mettent en lumière la détérioration des relations traditionnellement proches entre les deux pays. En raison des contraintes financières apportées par les dépenses de guerre de la Grande-Bretagne, le Canada ne fut pas en mesure de réinstaurer les relations commerciales d'avant-guerre au moyen desquelles il avait pu utiliser ses ventes au Royaume-Uni pour financer le déficit des ses échanges avec les Etats-Unis. La stratégie britannique de négociation allait forcer le Canada à repenser la dépendance envers le marché britannique qui avait occupé une place majeure dans son histoire jusque là. Ces conclusions nous portent à remettre en question l'idée que le gouvernement aurait « vendu » le pays lorsqu'il a détourné son attention de la Grande-Bretagne vers les États-Unis, aux lendemains de la deuxième guerre mondiale

    The Ontario Universities’ Teaching Evaluation Toolkit: Feasibility Study

    Get PDF
    This feasibility study (the first of three phases) sought to develop a framework for improvement-oriented formative and summative assessment of teaching in Ontario. It is intended to inform future developments in teaching evaluation in the Province, and to offer a well-contextualized understanding of what the goals of teaching evaluation ought to be, what the challenges are, and the kinds of initiatives and infrastructure that would best promote the evolution of a data- informed and inquiry-inspiring approach to evaluating and improving teaching. Our institutionally-based project teams identified and examined leading teaching evaluation practices in use internationally, compared to those in use in the Ontario context, and identified a range of aggregate data and technical tool elements to be considered when moving forward.https://scholar.uwindsor.ca/ctlreports/1003/thumbnail.jp
    • …
    corecore